Screws In My Coffee

Today's goal was to get Sylvia's Car into the garage.  That meant that I had to finish up a few work bench projects and then move my stuff back into the workshop. I replaced the wooden peg board and and permanently mounted my Access Point and tool bar. At first I had the Access point here.  Then I moved it. I added my tool bar and moved the WiFi access point closer to the power panel. Yeah I know all about ethernet being too close to electrical power.  I will move it later. I got the drawer mounted and I built a rolling box for my power tools.  I got the inspiration for the rolling box from April Wilkerson .  I used a plastic tray that a mold contractor left at our house a few years ago.  I mad the plastic crate fit on to a lolling platform.  I can remove the crate and use the wooden dolly to move other items. These 2x2s allow the crate to remain stationary on the wooden dolly. Thsi is the wooden dolly.  I painted one end of ...

I have never constructed a drawer from with a bottom that is glued into slots on the sides created using a router.  The last workshop bench that I built was in Portland, and I just nailed a box together and put in on a shelf below the bench.  It did not have slides and when it was full of tools it was hard to open. This work bench is going to have drawers with metal ball bearing slides rated for 100 pounds.  I will also construct some boxes with caster wheels to slide under the bench.  I got the inspiration for this workbench from April Wilkerson . I have always wanted to have a good set of woodworking tools.  I am gradually buying the tools that I need as I build this work bench.  The skills and the tools that I acquire from building the drawers for my workbench will be used to build drawers in the kitchen pantry.  The kitchen pantry has a bunch of shelves with do not allow for efficient organization of items.  There is also a lot of wasted s...

I got a big fan to help out with the hot humid weather.  Having a little breeze while working in a garage or out on the driveway really helps. This past Friday, Saturday and Sunday I worked to finish the frames for the two six foot work benches for my shop.  I had an office desk that was purchased used at a garage sale in Austin, Texas that was too big for the house so it was used as a work bench in my garage.  I wanted to repurpose the four drawers in my new work bench.  I will use the other parts on future projects.  All of the 2 x 4 framing was built from wood taken out of the master bathroom. I also fixed the shop vacuum so that it fit snuggly on my tables saw.  I got some pipe fittings and cut one of the vacuum extension tubes and it works great.  I still have a lot to do to get the saw set up the way that I want, but for now I can make consistent cuts for multiple pieces of wood quickly and accurately. One of the things that I will make...

I finished the first shop bench on Sunday.  I did some plumbing hacking and added a hose bib on the sink so that I could attach a hose for a sprayer.  I usually attach a longer hose to this sink to wash my bike so adding an extra connection for a hose will free up the regular faucet. I removed the legs on the old sink and mounted it in the 2 x 4 framing before adding the 1/2 inch plywood top.   I will paint and seal it later. This is the first time that I have used a Kreg Jig Pocket-Hole Machinery for a project.  I have been watching DIY wood workers on YouTube for a few years using this tool and I finally bought one.  I used it to put in the sink supports and a top support after shoving the frame into the location which was really snug.  Having the ability to secure the 2 x 4 from the inside with the pocket hole drill was cool.